MikroTik MikrotikMikrotikFirst NameLast NameWhat training did you take?- Select -Project ManagementNetworkingAutocadMikrotikOthers1. A network ready device is directly connected to a MikroTik RouterBOARD with a correct U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.88.1 using a subnet mask of 255.255.255.252. What will be a valid IPv4 address for the RouterBOARD for a successful connection to the device? A) 192.168.88.1/255.255.255.0 B) 192.168.88.3/255.255.255.252 C) 192.168.88.2/255.255.255.252 D) 192.168.88.1/255.255.255.2522. How many IP addresses can one find in a /30 subnet ? A. 4 B. 1 C. 3 D. 23. You have a router with configuration- Public IP :202.168.125.45/24- Default gateway:202.168.125.1- DNS server: 248.115.148.136, 248.115.148.137- Local IP: 192.168.2.1/24Mark the correct configuration on client PC to access to the Internet A) IP:192.168.2.2/24 gateway:202.168.125.45 B) IP:192.168.1.223/24 gateway:248.115.148.136 C) IP:192.168.2.115/24 gateway: 192.168.2.1 D) IP:192.168.2.253/24 gateway:202.168.0.1 E) IP:192.168.0.1/24 gateway:192.168.2.1 4. Select which of the following are 'Public IP addresses': A) 172.16.254.2 B) 192.168.0.1 C) 11.63.72.21 D) 10.110.50.37 E) 172.28.73.215. How many IP addresses can one find in a /30 subnet ? A. 4 B. 1 C. 3 D. 26. What interfaces you can bridge together in MikroTik router in the following instances A) Only ethernet and Ethernet B) Only Ethernet and Wireless C) Wireless in Station and Ethernet D) Wireless in Bridge Mode, AP bridge mode or Station Bridge mode with Ethernet or SFP (fiber ) ports7. Routes Flags in MikroTik routing table can be any of the following A. Connected, Bridged, Static B. Active, Connected, Static C. Active, Disconnected, Static D. Static, Bridged, Connected, Active8. You can use simple queue to limit customer’s bandwidth using the following A. IP address B. Mac address9. Src Nat can used to masquerade local network to be able to use the Public IP address on the WAN interface of the router for browsing A. No B. Yes10. MikroTik station in bridging mode can include the following A. station bridge, station wds, station B station bridge, station wds, station, station-pseudo bridge C station bridge, station wds, station pseudo-bridgeSubmit
